Mabetón
Mabetón

Wall panels production Plants (light weight - interior walls )

ACOTEC –profitable technology for light weight - partition wall panels


All the construction components manufactured using the ACOTEC production lines mean an important decrease in construction costs.

The instalation cost of the Acotec interior wall panels can go up to 40% less than using regular construction brick.

Acotec

Efficent Production


The ACOTEC lines make possible the efficent production of high quality construction components at an extremely low cost.

Highly automatized lines produce 80 m2 components per hour with only 2 or 3 operators.



Acotec
Acotec

Production supervision, planification and control can be easily done from the control panel.
Acotec
Acotec
Depending on the final application, different types or concrete, from regular to light density can be used.

Panels are made onto 5mm thick steel plate.
Acotec
Acotec
Concrete is compacted in a Stationary Extruder at a speed of 80m2/h.
After extrusion, panels are cut along the steel plate edge when they are still wet.
Acotec
Acotec
A concrete cutter makes possible to obtain products off the standard sizes.
Panels with the steel plate are cut and piled up in 7-12 stacks and then automatically moved to a curing warehouse.
Acotec
Acotec
Natural curing takes place at the pre-curing warehouse.This stage can also be automated.
Then, panels are separated from its steel plates and product quality is checked.
Acotec
Acotec
Steel plates are cleaned and oiled to be inserted, again,in the production process..
Final products are packed in shipping pallets whether manual or automatically, flanged and wrapped in plastic.
Acotec
Acotec
Product stacks are stored for 14-21 days before being delivered to the construction site.

Aggregates

For instance: portland´s regular cement , thick grain sand,fine grain sand,light weight sand.


The Final product is a high quality and economic construction component

  • Light weight: from 40kg/m2
  • Acoustic insulating : máximum 55 dB
  • Fireproof: 0,5 – 2 h
  • Dampness-proof
  • Firm and solid: 8 – 30 Mpa
  • Health safe
  • Environment-friendly
Acotec

Advantages of the ACOTEC production lines:

  • Excellent profitability
  • Low production cost
  • Minimum energy requirement
  • Minimum labor
  • Little production area requirement
  • Environment-friendly production: no polution, noiseless and no vibrations are produced
  • Easy handling and maintenance
  • Factory automation according to customer's requirements
Acotec


© Mabetón España, S.A.- Optimized Website to 1024 x 768 Privacy Policy - Site Map - Design