Mabetón
Mabetón

PITCHING MACHINE


NIPPY Pitching Machine is an automatic machine to pitch natural stone and concrete blocks by working on four sides simultaneously, to create an elegant and natural looking product.
Nippy can satisfy most special industry requirements thanks to the use of flexible control software. The Pitching Machine process is carried out using 4 special blades made of anti-wearing steel working at high speed on the 4 edges of the split side simultaneously.

Nippy

Machine functions may be easily personalised through easy-to-use controls, to make any changes in product processing.
The machine is provided with a system of telediagnostics, to check the plant without any direct intervention by our technicians, therefore finding faults and making recipe modifications from a distance.
Nippy



NIPPY
Nippy is provided with a block rotating device installed at the entrance of the machine, to rotate the block by 180°, for blades to see the split sides of the product. 
After the blocks have been pitched, they are moved through an out-feed trolley to the transport belt, transferring them to the unloading station.

Nippy



The frontal in-feeding the Pitching Machine process was conceived to be installed in line after any kind of machine.
The Pitching Machine process off-cuts are collected by a rubber belt positioned just below the pitching position and conveyed to a waste box, to be safely removed by the operator. 

Should processing operations be realised on different block sizes, the Pitching Machine manual regulations and blade changes are fast and easy to be made: the operator can start a new pitching process with blocks of different dimensions within 15 minutes max.

Nippy


TECHNICAL FEATURE:
Material to be processed: Natural stones and/or concrete blocks.
DIMENSIONS OF MATERIALS TO BE PROCESSED :
Width from 200 ÷ 600mm;Length 90 ÷ 300mm ; Height 65 ÷300mm.
(The combination of the three dimensions must be verified by Penta technicians)
Production: 10 ÷ 20 blocks per minute, depending on material dimensions.
Height of the in-feed conveyor: h = 850 ÷ 1000mm.
Pitched on All four sides at the same time;
STANDARD PITCHING depth: 10÷15mm.
Electrical Power SUPPLY: ≈ 8Kw – 400Volt – 50/60Hz.
COMPRESSED Air Supply:
1300Nl/min, to be supplied at a 800KPa pressure.
MACHINE Dimensions:
Length =3500mm, Width=2200mm, H= 2450mm.
Weight: 3000Kg.
Nippy

blocks
blocks
blocks


© Mabetón España, S.A.- Optimized Website to 1024 x 768 Privacy Policy - Site Map - Design